•  
  •  
 

Keywords

Lightweight sandwich panels, Particle board core, Expanded polystyrene core, compressive strength

Document Type

Research Paper

Abstract

Lightweight sandwich panels are mainly utilized in the aerospace and automobile industries, and are increasingly explored for sustainable construction. This study investigates the mechanical performance of sandwich panels composed of mortar and concrete facings with expanded polystyrene (EPS) and particle board (PB) cores. Mortar facings were a 1:3 mix of cement and sand, a 0.65 water-cement ratio, and a 1:2:4 mix of cement, sand, and granite for the concrete, with a 0.5 water-cement ratio. Cube (75 × 75 × 75 mm3) and prism (100 × 100 × 400 mm3) samples were fabricated with 15 mm facings and 45 mm cores, then cured and tested for compressive and flexural strength at 7, 14, 21, and 28 days in line with BS EN 12390-3:2019 and ASTM C293. At 28 days, concrete-faced PB-core panels achieved a compressive strength of 8.18 N/mm², approximately 17% higher than 6.96 N/mm2 of EPS-core. Mortar-faced PB-core panels reached 6.44 N/mm², 64.13% compared to 4.13 N/mm² for mortar-faced EPS panels. Flexural strength followed similar patterns: concrete-faced PB-core panels increased by 96% from 9.18 N/mm² at 7 days to 9.48 N/mm² at 28 days, while EPS-core panels improved by 87.9% from 6.56 N/mm² to 7.46 N/mm². ANOVA (α = 0.05) confirmed statistically significant differences between core types, with PB consistently outperforming EPS due to higher stiffness and improved core–facing bonding. EPS and PB core panels remain suited for non-load-bearing applications.

References

A. De Jong, J. Mark Van Dijk, J. Meyer, Analysis of Innovative Practices in Advanced Materials and Structural Engineering, Fusion of Multidisciplinary Research An International Journal, 2 (2021) 178–188. https://doi.org/10.63995/JWFN9981. Y. Nasr, H. El Zakhem, A.E.A. Hamami, M. El Bachawati and R. Belarbi, Comprehensive review of innovative materials for sustainable buildings energy performance, Energies, 16 (2023) 7440. https://doi.org/10.3390/en16217440. O. S. Dobrzyńska, A legal framework for energy-conscious urban planning in Poland and Germany, Energies, 16 (2023) 6428. https://doi.org/10.3390/en16186428. W. Shafik, Energy policies and infrastructure requirements for efficient green buildings, in: Sustainable Technologies for Energy Efficient Buildings, 1st ed., CRC Press, 2024, pp. 212–240. S. N. Jonnala, D. Gogoi, S. Devi, M. Kumar and C. Kumar, A comprehensive study of building materials and bricks for residential construction, Constr. Build. Mater., 425 (2024) 135931. https://doi.org/10.1016/j.conbuildmat.2024.135931. S. Momenifar, A Hybrid Decision Support System for Partition Wall Selection with an Application in Masonry Wall Systems, Ph.D. Thesis, University of Alberta, Edmonton, Canada, 2024. https://doi.org/10.7939/r3-egsf-fn27. M.A. Kamal, Advances in Bricks and Blocks for Building Construction, Materials Research Foundation, Millersville, PA, USA, 2021. Y. Al-Radhi, K. Roy, H. Liang, K. Ghosh, G.C. Clifton and J.B. Lim, Thermal performance of different construction materials used in New Zealand dwellings comparatively to international practice – A systematic literature review, J. Build. Eng., 72 (2023) 106346. https://doi.org/10.1016/j.jobe.2023.106346. D. Vijayan, A. Mohan, J. Revathy, D. Parthiban and R. Varatharajan, Evaluation of the impact of thermal performance on various building bricks and blocks: A review, Environ. Technol. Innov., 23 (2021) 101577. https://doi.org/10.1016/j.eti.2021.101577. M. F. Ghazy, M. A. A. Abd Elaty, M. A. E. Sakr and E. M. Arafa, Thermo-Mechanical Performance of Sustainable Lightweight Sandwich Panels Utilizing Ultra-High-Performance Fiber-Reinforced Concrete, Buildings, 15 (2025) 593. https://doi.org/10.3390/buildings15040593. T. P. Sah, A. W. Lacey, H. Hao and W. Chen, Prefabricated concrete sandwich and other lightweight wall panels for sustainable building construction: State-of-the-art review, J. Build. Eng., (2024) 109391. https://doi.org/10.1016/j.jobe.2024.109391. E. Vladimirova, M. Gong, Advancements and applications of wood-based sandwich panels in modern construction, Buildings, 14 (2024) 2359. https://doi.org/10.3390/buildings14082359. Q. Ma, et al., A review of the recent trends on core structures and impact response of sandwich panels, Journal of Composite Materials, 55 (2021) 2513–2555. https://doi.org/10.1177/0021998321990734. S. K. Sahu, P. R. Sreekanth, S. K. Reddy, A brief review on advanced sandwich structures with customized design core and composite face sheet, Polymers, 14 (2022) 4267. D. O. J. Dos Santos, P. R. L. Lima, R. D. Toledo Filho, Flexural Behavior of Lightweight Sandwich Panels with Rice Husk Bio-Aggregate Concrete Core and Sisal Fiber-Reinforced Foamed Cementitious Faces, Materials, 18 (2025) 1850. https://doi.org/10.3390/ma18081850. R. Kassab, P. Sadeghian, Design Guidelines for FRP-Faced Foam Core Sandwich Panels: Review and Building Code Compliance, J. Archit. Eng., 31 (2025) 03125002. https://doi.org/10.1061/JAEIED.AEENG-1920. M. I. Rofdi, N. S. M. Tamat, A. Nuryawan, H. Sakagami and A. Hermawan, Studies on particleboard production using Expanded Polystyrene (EPS) waste as a binder for construction applications, Constr. Build. Mater., 449 (2024) 138279. https://doi.org/10.1016/j.conbuildmat.2024.138279. P. Boruszewski, P. Borysiuk, A. Jankowska and J. Pazik, Low-density particleboards modified with expanded and unexpanded fillers characteristics and properties, Materials, 15 (2022) 4430. https://doi.org/10.3390/ma15134430. H. J. Muhammada, Assessment of Expanded-Polystyrene (EPS) as an Alternative and Sustainable Building Material to Conventional Construction with Emphasis on Environmental Degradation, Int. J. Eng. Technol. Innov., (IEC 2024) (2024) 01–09. R. Garcia, I, Calvez, A. Koubaa, V. Landry and A. Cloutier, Sustainability, circularity, and innovation in wood-based panel manufacturing in the 2020s: Opportunities and challenges, Curr. For. Rep., 10 (2024) 420–441. https://doi.org/10.1007/s40725-024-00229-1. S. H. Lee, W. C. Lum, J. G. Boon, L. Kristak, P. Antov, M. Pedzik, Particleboard from agricultural biomass and recycled wood waste: A review, J. Mater. Res. Technol., 20 (2022) 4630–4658. https://doi.org/10.1016/j.jmrt.2022.08.166. M. Assel, Evaluation of selected properties of boards with increased fire resistance, M.Sc. Thesis, České vysoké učení technické v Praze, 2023. A. Kremensas, S. Vaitkus, S. Vejelis, S. Cslonka and A. Kairyte, Hemp shivs and corn-starch-based biocomposite boards for furniture industry: Improvement of water resistance and reaction to fire, Industrial Crops and Products, 166 (2021) 113477. https://doi.org/10.1016/j.indcrop.2021.113477. A. Singh, A. K. Srivastava, A. Kumar and P. Gautam, Design for low thermal conductivity and low vibrational impact without efflorescence of the composite bricks developed by waste plastic resin/fly ash/glass powder/gypsum, International Journal on Interactive Design and Manufacturing (IJIDeM), 19 (2) (2025) 949–960. https://doi.org/10.1007/s12008-023-01582-4 T. Singh, S. Sehgal, Structural health monitoring of composite materials, Archives of Computational Methods in Engineering, 29 (2022) 1997–2017. https://doi.org/10.1007/s11831-021-09666-8 K. Li, Y. Li, Y. Zou, B. Yuan, A. Walsh and D. Carradine, Improving the fire performance of structural insulated panel core materials with intumescent flame-retardant epoxy resin adhesive, Fire Technol., 59 (2023) 29–51. https://doi.org/10.1007/s10694-021-01203-0. S. K. Kirme, V. S. Kapse, A comprehensive review of residential building energy efficiency measures in India, Energy Build., (2024) 114537. https://doi.org/10.1016/j.enbuild.2024.114537. J. Yzenas, Bulk density, relative density (specific gravity), pore structure, absorption, and surface moisture, in: Significance of Tests and Properties of Concrete and Concrete-Making Materials, ASTM International, 2006, pp. 346–354. ASTM, C270 Standard Specification for Mortar for Unit Masonry, American Society for Testing and Materials, West Conshohocken, PA, USA, 2014. AASHTO T121, Standard Method of Test for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete, American Association of State Highway and Transportation Officials, Officials: Washington, DC. ASTM C150/C150M-20, Standard specification for Portland cement, Technical Report, ASTM International, West Conshohocken, PA, USA, 2020. ASTM C33, Standard specifications for concrete aggregates, ASTM Standard Book, 2003. BSI, British Standard: Specification for aggregates from natural sources for concrete, BS 882:1992, British Standards Institution, London, UK, 1992. G. Barrera Castro, L. Ocampo Carmona and J. Olaya Florez, Production and characterization of the mechanical and thermal properties of expanded polystyrene with recycled material. Ingeniería y Universidad 21(2): 177-194 (2017). https://doi.org/10.11144/javeriana.iyu21-2.mtpe P. Kumar, R. Kumar, S. Surabhi, M.R. Rahman and S. Khan, Development of sustainable precast concrete sandwich wall panels using artificial aggregates and mineral admixture, in: E3S Web Conf., 596 (2024) 01006, EDP Sciences. https://doi.org/10.1051/e3sconf/202459601006 Neville, A. M. and Brooks, J. J., Concrete Technology. 2nd Edition, Pearson Education Ltd., London 2010. Sukontasukkul, P. and S. Mindess, The shear fracture of concrete under impact loading using end confined beams, Mater. Struct., 36 (2003)372-378. https://doi.org/10.1007/BF02481062 E. Serri, B. Raghavan, D. Yeoh, W. Al-Azzawi, Mechanical properties of precast concrete sandwich panels: Effect of insulation type and shear connector configuration, Case Stud. Constr. Mater., 11 (2019) e00266. https://doi.org/10.1016/j.cscm.2019.e00266

Highlights

EPS and particle board were obtained and used as core materials for sandwich panels. Cement and aggregates were used as facing materials in the sandwich panel production. Sandwich panels with various concrete and mortar facings and EPS or PB cores were fabricated. Flexural strength followed similar patterns: concrete-faced PB-core panels increased by 96% from 9.18 N/mm² at 7 days to 9.48 N/mm² at 28 days. ANOVA analysis showed that mechanical performance was strongly affected by facing materials.

DOI

10.30684/etj.2025.163997.2006

First Page

1002

Last Page

1014

Download

Share

COinS