•  
  •  
 

Keywords

Electronic control system, Fouling factor, Heat exchanger, Manufactured solar heater, Waste recycling

Document Type

Research Paper

Abstract

In this study, the effect of an electronic control system (ECS) on the performance of a solar heater fabricated from recycled materials was investigated . The study found that the maximum thermal energy output before installing the ECS stood at 378 W, which was significantly improved to 450 W after integration, indicating a commendable enhancement in the efficiency of the solar heater. The thermal efficiency of the solar heater also saw a substantial jump from 71.7% to 82% after connecting the ECS. The study also uncovered the temperature disparity between the trapped and ambient air (max. ΔT = 20.4 °C) influenced heat loss from the space between the glass cover and the two heat exchangers. To address this issue, the sides and base of the heater assembly were insulated with foam material to minimize heat loss. Furthermore, the ECS was programmed to regulate the water flow rate in the solar collector to prevent the water temperature from surpassing 65 °C in winter and 40 °C in spring and autumn. The study harnessed solar panels to provide electricity to the ECS, which enabled the technology to adapt the solar heating process according to environmental conditions and user needs. The study's findings demonstrate the potential of utilizing an ECS for recycling waste solar heaters, leading to enhanced heat transfer efficiency and long-term financial and environmental benefits.

References

Kadum, A. Imran, and S. Aljabair, Heat Transfer in Electronic Systems Printed Circuit Board: A Review, Eng. Technol. J., 40 (2022) 99–108. https://doi.org/10.30684/etj.v40i1.2113 Aboud, H. Hussein, and A. Numan, Effect of Temperature and Humidity Factors on Water Production Using Solar Energy with Smart Controlling, Eng. Technol. J., 40 (2022) 241–248. https://doi.org/10.30684/etj.v40i1.2282 Souliotis, S. Papaefthimiou, Y. G. Caouris, A. Zacharopoulos, P. Quinlan, and M. Smyth, Integrated collector storage solar water heater under partial vacuum, Energy, 139 (2017) 991–1002. https://doi.org/10.1016/j.energy.2017.08.074 M. Abd-Ur-Rehman and F. A. Al-Sulaiman, Optimum selection of solar water heating (SWH) systems based on their comparative techno-economic feasibility study for the domestic sector of Saudi Arabia, Renew. Sustain. Energy Rev., 62 (2016) 336–349. https://doi.org/10.1016/j.rser.2016.04.047 K. J. AL-ISAWI, Investigation on Effect of Pitch Ratio for Finned Tube in Cross-Flow Heat Exchanger on Fluid Flow and Heat Transfer, T.C. Karabuk Univ. Inst. Grad. Programs Dep. Mech. Eng. Prep., Msc. Thesis, 153, 2022, http://acikerisim.karabuk.edu.tr:8080/xmlui/handle/123456789/2264 H. Al-askaree and N. F. O. Al-muhsen, Experimental investigation on thermal performance of solar water heater equipped with Serpentine fin core heat exchanger, Clean. Eng. Technol., 12 (2022) 100593. https://doi.org/10.1016/j.clet.2022.100593 B. Khelifa et al., Optical simulation, characterization and thermal stability of Cr2O3/Cr/Cr2O3multilayer solar selective absorber coatings, J. Alloys Compd., 783 (2019) 533–544. https://doi.org/10.1016/j.jallcom.2018.12.286 È. H. Alaskaree, O. R. Skheel Alkhafaji, and N. F. O. Al-Muhsen, Effect of chromium trioxide coating on the thermal performance of solar thermal collector, Karbala Int. J. Mod. Sci., 6 (2020) 19–25. https://doi.org/10.33640/2405-609X.1311 S. Banthuek, T. Suriwong, P. Nunocha, and A. Andemeskel, Application of Ni-Al2O3 cermet coating on aluminium fin as the solar absorber in evacuated tube collector (ETC), Mater. Today Proc., 5 (2018) 14793–14798. https://doi.org/10.1016/J.MATPR.2018.04.007 M. Hashim, A. T. Shomran, H. A. Jurmut, T. S. Gaaz, A. A. H. Kadhum, and A. A. Al-Amiery, Case study on solar water heating for flat plate collector, Case Stud. Therm. Eng., 12 (2018) 666–671. https://doi.org/10.1016/j.csite.2018.09.002 B. B. W. H. C. Hottel, The Performance of Flat-Plate Solar-Heat, Trans. ASME., 64 (1942) 91-103. https://doi.org/10.1115/1.4018980 Li, G. Flamant, X. Yuan, P. Neveu, and L. Luo, Design of Compact Heat Exchangers for Transfer Intensification Compact heat exchangers : A review and future applications for a new generation of high temperature solar receivers, Renew. Sustain. Energy Rev., 15 (2011) 4855-4875. https://doi.org/10.1016/j.rser.2011.07.066 Kizildag, J. Castro, H. Kessentini, E. Schillaci, and J. Rigola, First test field performance of highly efficient flat plate solar collectors with transparent insulation and low-cost overheating protection, Sol. Energy J., 236 (2021) 239–248. https://doi.org/10.1016/j.solener.2022.02.007 Liu and M. Sakr, A comprehensive review on passive heat transfer enhancements in pipe exchangers, Renew. Sustain. Energy Rev., 19 (2017) 64-81. https://doi.org/10.1016/j.rser.2012.11.021 Evangelisti, R. D. L. Vollaro, and F. Asdrubali, Latest advances on solar thermal collectors : A comprehensive review, Renew. Sustain. Energy Rev., 114 (2019) 109318. https://doi.org/10.1016/j.rser.2019.109318 R. S. Tambunan, Y. P. Sibagariang, H. Ambarita, F. H. Napitupulu, and H. Kawai, Numerical study on the effects of absorptivity on performance of flat plate solar collector of a water heater, J. Phys. Conf. Ser., 978 (2018) 012099 . https://doi.org/10.1088/1742-6596/978/1/012099 Anoune, M. Bouya, A. Ben Abdellah, and A. Astito, Optimizing and Controlling the Productivity of a Flat Plate Collector by Using an Electronic System, Energy Procedia,107 (2017) 180-187. https://doi.org/10.1016/j.egypro.2016.12.166 Kalapala and J. K. Devanuri, In fl uence of operational and design parameters on the performance of a PCM based heat exchanger for thermal energy storage – A review, J. Energy Storage, 20 (2018) 497-519. https://doi.org/10.1016/j.est.2018.10.024 Faisal, M. Khalid, M. Vaka, and R. Walvekar, Recent progress in solar water heaters and solar collectors : A comprehensive review, Therm. Sci. Eng. Prog., 25 (2021) 100981. https://doi.org/10.1016/j.tsep.2021.100981 N. Unar et al., Performance evaluation of solar flat plate collector using different working fluids through computational fluid dynamics, SN Appl. Sci., 2 (2020) 1–10. https://doi.org/10.1007/s42452-020-2005-z Jalil, R. Nothim, and M. Hameed, Effect of Wavy Fins on Thermal Performance of Double Pass Solar Air Heater, Eng. Technol. J., 39 (2021) 1362–1368. https://doi.org/10.30684/etj.v39i9.1775 Rostami et al., Applied sciences Heat Transfer Analysis of the Flat Plate Solar Thermal Collectors with Elliptical and Circular Serpentine Tubes, Appl. Sci., 12 (2022) 4519. https://doi.org/10.3390/app12094519 A. Hussein, K. Habib, A. S. Muhsan, R. Saidur, O. A. Alawi, and T. K. Ibrahim, Thermal performance enhancement of a flat plate solar collector using hybrid nanofluid, Sol. Energy, 204 (2020) 208–222. https://doi.org/10.1016/j.solener.2020.04.034 Hernández and R. E. Guzmán, Comparison of three systems of solar water heating by thermosiphon, J. Phys. Conf. Ser., 687 (2016). https://doi.org/10.1088/1742-6596/687/1/012007 García Pérez, Modeling the effects of unsteady flow patterns on the fireside ash fouling in tube arrays of kraft and coal-fired boilers, Acta Universitatis Lappeenrantaensis 715, 2016. https://urn.fi/URN:ISBN:978-952-335-001-4 Irshad, A. I. Khan, S. A. Irfan, M. M. Alam, A. Almalawi, and M. H. Zahir, Utilizing Artificial Neural Network for Prediction of Occupants Thermal Comfort: A Case Study of a Test Room Fitted with a Thermoelectric Air-Conditioning System, IEEE Access, 8 (2020) 99709–99728. https://doi.org/10.1109/ACCESS.2020.2985036

Highlights

Heater performance was compared without and with an electronic control system Heat exchanger conditions were discussed to determine temperature, gain and efficiency The coefficient of total heat loss and its relation to efficiency was discussed with and without the control system Hot water temperature increase relative to heat exchanger water flow rate was discussed

DOI

10.30684/etj.2024.145174.1652

First Page

869

Last Page

884

Download

Share

COinS