•  
  •  
 

Keywords

Atmospheric Water Generation, Atmospheric Water Harvesting Technologies, Thermoelectric Fresh Water Generator, Thermoelectric, Dew point

Document Type

Research Paper

Abstract

Atmospheric Water Generation assumes substantial significance as an innovative remedy for addressing water scarcity and augmenting water resilience. This technology facilitates water extraction directly from the atmosphere, presenting a sustainable and decentralized approach to water supply. The investigation into the feasibility of attaining the dew point temperature for a heatsink operating in the climatic conditions of Basra was conducted using Fluent 22.1 software. The minimum dew point temperature under extreme conditions was determined to be 10.52℃. A thermoelectric device was a primary component in cooling the moisture-laden air to produce water from atmospheric air. Simulations were executed using two complementary and two integrated heatsinks under turbulent airflow conditions ranging from 4 to 20 m/s. The results indicated an inverse relationship between heat distribution within the heatsink and fluid flow velocity, emphasizing the crucial role of airflow passage arrangement in the condensation process. Enhancing the heatsink's surface area and reducing airflow quantity proved effective in achieving the dew point temperature. The lowest temperature attained was 9.2℃, featuring intersecting heat exchangers with a flow velocity of 4 m/s. The result indicated that altering the flow pattern affects the condensation process's surface temperature by as much as 38%, while the rise in pressure difference can reach 20%. Under the same operational conditions, the difference in thermal conductivity between two distinct heat exchanger configurations, attributed to pressure variations, is notably 8%. The study concludes that the Qurna region benefits from favorable weather conditions, encompassing temperature and relative humidity, thereby enabling water generation from atmospheric air, notwithstanding the consideration of the dew point temperature as a limiting factor.

References

H. Gleick, The human right to water, Water Policy, 1 (1998) 487–503. https://doi.org/10.1016/S1366-7017(99)00008-2 R. Yassein, K. A. Al Asaady, A. A. Kazem, M. T. Chaichan, Environmental Impacts of Salt Tide in Shatt Al-Arab-Basra/Iraq, IOSR J. Environ. Sci., 10 (2016) 35–43. H. Al Obaidy, M. Al-Khateeb, The Challenges of Water Sustainability in Iraq, Eng. Technol. J., 31 (2013) 828–840. https://doi.org/10.30684/etj.31.5a3 A. Salehi, M. Ghannadi-Maragheh, M. Torab-Mostaedi, R. Torkaman, M. Asadollahzadeh, A review on the water-energy nexus for drinking water production from humid air, Renew. Sustain. Energy Rev., 120 (2020) 109627. https://doi.org/10.1016/j.rser.2019.109627 Wang, S. H. Danook, H. A. Z. Al-Bonsrulah, D. Veeman, and F. Wang, A Recent and Systematic Review on Water Extraction from the Atmosphere for Arid Zones, Energies, 15 (2022) . https://doi.org/10.3390/en15020421 Tu, R. Wang, Y. Zhang, J. Wang, Progress and Expectation of Atmospheric Water Harvesting, Joule, 2 (2018)1452–1475. https://doi.org/10.1016/j.joule.2018.07.015 Chen et al., Recent progress on sorption/desorption-based atmospheric water harvesting powered by solar energy, Sol. Energy Mater. Sol. Cells, 230 (2021)111233. https://doi.org/10.1016/j.solmat.2021.111233 T. Wilson, H. Cha, Y. Zhong, A. C. Li, E. Lin, B. El Fil, Design considerations for next-generation sorbent-based atmospheric water-harvesting devices, device, 1 (2023) 1–14. https://doi.org/10.1016/j.device.2023.100052 Srivastava, A. Yadav, Water generation from atmospheric air by using composite desiccant material through fixed focus concentrating solar thermal power, Sol. Energy, 169 (2018) 302–315. https://doi.org/10.1016/j.solener.2018.03.089 P. Joshi, V. S. Joshi, H. A. Kothari, M. D. Mahajan, M. B. Chaudhari, K. D. Sant, Experimental Investigations on a Portable Fresh Water Generator Using a Thermoelectric Cooler, Energy Procedia, 109 (2017) 161–166. https://doi.org/10.1016/j.egypro.2017.03.085 Eslami, F. Tajeddini, N. Etaati, Thermal analysis and optimization of a system for water harvesting from humid air using thermoelectric coolers, Energy Convers. Manag., 174 (2018) 417–429. https://doi.org/ 10.1016/j.enconman.2018.08.045 S. Solís-Chaves, C. M. Rocha-Osorio, A. L. L. Murari, V. M. Lira, A. J. S. Filho, Extracting potable water from humid air plus electric wind generation: A possible application for a Brazilian prototype, Renew. Energy, 121 (2018) 102–115. https://doi.org/10.1016/j.renene.2017.12.039 H. Esfe, S. Esfandeh, D. Toghraie, Numerical simulation of water production from humid air for Khuzestan province: Investigation of the Peltier effect (thermoelectric cooling system) on water production rate, Case Stud. Therm. Eng., 28 (2021) 101473. https://doi.org/10.1016/j.csite.2021.101473 M. A. Al-Lami, Z. R. Abbas, A. G. Alshammary, Study of water pollution problem in basra city of Iraq: A case study, Plant Arch., 20 (2020) 2274–2276. A. Mahmood, A. M. Eassa, H. Mohammed, Y. Shubbar, Assessment of ground water quality at Basrah , Iraq by water quality index ( WQI ), 21 (2013) 2531–2543. Boukhriss, K. Zhani, R. Ghribi, Study of thermophysical properties of a solar desalination system using solar energy, Desalin. Water Treat., 51 (2013) 1290–1295. https://doi.org/10.1080/19443994.2012.714925 Eslami, F. Tajeddini, N. Etaati, Thermal analysis and optimization of a system for water harvesting from humid air using thermoelectric coolers, Energy Convers. Manag., 174 (2018) 417–429. https://doi.org/10.1016/j.enconman.2018.08.045 G. Lawrence, The relationship between relative humidity and the dewpoint temperature in moist air: A simple conversion and applications, Bull. Am. Meteorol. Soc., 86 (2005) 225–233. https://doi.org/10.1175/BAMS-86-2-225 S. Dizaji, S. Jafarmadar, S. Khalilarya, A. Moosavi, An exhaustive experimental study of a novel air-water based thermoelectric cooling unit, Appl. Energy, 181(2016) 357–366. https://doi.org/10.1016/j.apenergy.2016.08.074 Çengel, Y. A., and Boles, M. A., Thermodynamics: An Engineering Approach, 5th ed, McGraw-Hill, 2006. Cengel, Y. A., Heat Transfer: A Practical Approach. McGraw-Hill Science, 2006. Holman, J. P., Heat Transfer, 10th ed., United States.: McGraw-Hill Companies, 2010. Zhang, Y. Li, Thermal Conductivity of Aluminum Alloys—A Review, Materials., 16 (2023). https://doi.org/10.3390/ma16082972 White, F. M., Fluid Mechanics, 4th ed., McGraw-Hill, 2001. Öztürk, E., CFD Analyses Of Heat Sinks For Cpu Cooling With Fluent, M.Sc. thesis, Middle East Technical University, 2004. Mahmoud, N. S., Investigation Of Heat Transfer Enhancement With Nanofluid And Twisted Tape Inserts In A Circular Tube, University of Technology, 2014. Kanargi, P. S. Lee, C. Yap, A numerical and experimental investigation of heat transfer and fluid flow characteristics of an air-cooled oblique-finned heat sink, Int. J. Heat Mass Transf., 116 (2018) 393–416. https://doi.org/10.1016/j.ijheatmasstransfer.2017.09.013 Rondeaux, Ph. Bredy, and J. M. Rey, Thermal conductivity measurements of epoxy systems at low temperature, American Institute of Physics, 197 (2002) 197–203. https://doi.org/10.1063/1.1472543

Highlights

Environmental conditions in Qurna, Basra, were analyzed for atmospheric water generation Fluent 22 software was used to simulate feasible temperatures for condensation Two airflow patterns were tested for effectiveness in temperature and pressure reduction Changing airflow patterns altered condensation surface temperatures by up to 38%

DOI

10.30684/etj.2024.145961.1671

First Page

959

Last Page

977

Download

Share

COinS